DuraShield HD by Syntek
DuraShield HD improves driver reaction time by keeping windshields and automotive glass surfaces clearer. It improves visibility during inclement weather, and reduces the likelihood of damage from small road debris. DuraSheild HD also allows insects to be easily washed away, and makes ice and snow much easier to remove. It protects against acid rain, corrosion and mineral buildup. It keeps glass looking newer longer and helps you preserve the integrity of your original windshield.
• Improves clarity and visibility to extend driver reaction time
• Deflects small road debris to reduce damage to glass
• Significantly reduces Night Glare
• Allows insects to be easily washed away
• Makes snow and ice much easier to remove
• Protects against acid rain, corrosion and mineral buildup
Directions for Use:
Before applying read through the complete product
instructions and understand the process completely. We suggest using rubber gloves to protect
your hands. DuraShield HD can be used on
any glass surface that does not come in contact with food (e.g. car windows,
shower doors, mirrors, etc.)
NOTE: USE FOR GLASS SURFACES ONLY. DO NOT APPLY IN
DIRECT SUNLIGHT or on TRANSPARENT PLASTICS.
STEP 1 –
Cream Cleaner
1.
Start by wetting the glass with water and leave
wet. (Do NOT use Cream Cleaner on DRY glass surfaces).
2.
Apply Cream Cleaner to pad from kit. Apply a small
amount of Cream Cleaner on center of pad from kit. Gently massage over entire
surface of glass.
3.
Rinse surface with water or damp cloth until
every trace of Cream Cleaner is gone.
4.
Repeat application of Cream Cleaner if necessary
until glass surface is clean and sparkling.
5.
MAKE SURE SURFACE IS COMPLETELY DRY BEFORE
CONTINUING! (If needed, thoroughly clean with an alcohol-based glass cleaner.) Wipe off completely with a microfiber, terry
cloth towel or dry paper
towel until completely dry before proceeding to Step 2.
STEP 2 – Glass Window Treatment (Two
Single Towelettes)
1.
In a well-ventilated
area, wipe first towelette across the entire glass surface using a firm, circular,
and overlapping motion.
2.
Repeat application
until towelette is dry. Take out the second towelette and repeat the
process until
the towelette is completely dry.
3.
Allow the chemical to
dry up to a minute on the glass after application is complete.
4.
Wait for haze to
appear before wiping off haze with a damp microfiber towel or paper towel and
polish
the surface with a dry microfiber towel until
crystal clear.
NOTE:
USE ON GLASS SURFACES ONLY AND DO NOT APPLY IN DIRECT SUNLIGHT. Apply
ONLY in temperatures between 50 °F to 90 °F (10 °C to 32.2 °C).
Step 3 – Refresh Spray (As Needed)
Apply Refresh spray when needed to
regenerate repellency. Spray on the
entire glass surface, then wipe
off with clean, microfiber towel.
CAUTION: Use in a well-Ventilated area.
SKIN CONTACT: Wash with soap and water.
SWALLOWING: Do not induce vomiting.
EYE CONTACT: Flush eyes with water. If irritation persists, seek
medical attention.
FLAMMABLE:
Keep out of reach of children.
